Initial PowerEdge MX deployment begins with assigning network settings for OME-M and completing the Chassis Deployment Wizard.
There are three methods for initial configuration:
- Using the LCD touchscreen on the front-left of the MX7000 chassis (if installed)
- Setting the initial OME-M console IP address through the KVM ports on the front-right side of the MX7000 chassis
- Setting the initial OME-M console IP address through the serial port on the MX9002m module
The Deployment Wizard is displayed on first login to the console and enables configuration of the following:
- Time
- Alerting
- iDRAC9 quick deployment settings
- Network IOM access settings
- Firmware updates
- Network proxy settings
- MCM group definition