Complete the following steps to launch the VMware Cloud Builder web interface:
Turn on Cloud Builder VM.
The VM must finish booting up and load the application stack.
Using a web browser, go to the Cloud Builder web interface at https://<Cloud Builder IP Address>.
Log in using the credentials that you specified during OVA deployment.
Review the EULA, and if you agree, click Agree to End User License Agreement, and then click Next.
Select VMware Cloud Foundation. Be sure not to select VMware Cloud Foundation on VxRAIL.
Review the list of Prerequisites and ensure that they have all been completed
Place a checkmark to indicate that the prerequisites have been met and select Next
If you have not obtained and completed the Cloud Foundation Information Spreadsheet, click Download Deployment Parameter Sheet. If you have the parameter sheet click Next to move forward
If you have not completed your parameter sheet do it now. If the parameter sheet is complete, click Next to continue.
Click Select File to browse to your completed parameter sheet.
Locate your completed parameter sheet and click Open.
Click Next to begin the validation phase.
If validation discovers any issues in your configuration or parameter file, it shows an error and provides clear and detailed information on the issue. Read the message provided, correct the issue(s) and run the validation again. Validation can be run as many times as necessary to obtain a successful result.
Once Validation has passed, and you have the green banner indicating that 'Configuration file validated successfully', click Next. A pop-up appears on the screen to Deploy SDDC Manager.
Click DEPLOY SDDC to continue
The deployment process begins. The deployment takes more than an hour. If the deployment completes successfully, a SDDC Deployment Complete pop-up message appears. If there were any issues, you can identify them in the VMware Cloud Foundationdeployment screen.
Review any task failures and correct the issue. You can restart the deployment when you have resolved the issue(s).
Click LAUNCH SDDC MANAGER
VMware Cloud Foundation on Dell servers and networking hardware is now successfully deployed.