Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking SmartFabric Services Deployment with VxRail 7.0.400
Introduction Hardware used in this guide Topology Deployment Planning Configure the First Leaf Switch Pair Deploy First VxRail Cluster Expand to Multirack Add a second VxRail cluster Deploy and Configure OMNI
Deploy and Configure OMNI
Deploy OMNI VM
OMNI console configuration
OMNI web UI configuration
Register vCenter Server in OMNI
Validated Components CLI Commands Cisco Nexus External Switch Configuration Example Support and Feedback

OMNI web UI configuration

Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > Dell Networking SmartFabric Services Deployment with VxRail 7.0.400 > OMNI web UI configuration

OMNI web UI configuration


    1. In a browser, connect to the OMNI web UI. 
    2. Select Launch OMNI Fabric Management Portal. 
    3. Enter the username admin and the OMNI admin password configured earlier. 
    4. Click SIGN IN. 
    5. On the OMNI Home > SFS/SFSS tab, click the radio button next to the SmartFabric instance as shown. 
      Figure 139. OMNI Home SFS/SFSS tab
      SmartFabric instance selected
    6. Click EDIT. 
    7.  In the Edit a Service Instance window, enter the REST_USER Password that is configured on the SmartFabric switches and check the Register for Events box. 
      Note: The default REST_USER password is admin. If the password is still set to admin, see the OpenManage Network Integration User Guide, Release 3.2 to change it.

      Figure 140. Edit SmartFabric instance
      Edit SmartFabric instance
    8. Click SUBMIT. 
      The Successmessage displays.
      Figure 141. SmartFabric instance edit successful
      SmartFabric instance edit successful
    9.  Take the SmartFabric Instance out of maintenance mode by clicking the toggle button in the Maintenance Mode column and then click OK. 
      The toggle color changes from green (enabled) to gray (disabled) and the Statuscolumn displays a green checkmark, as shown.
      Figure 142. SmartFabric Instance configured
      SmartFabric Instance configured