The fabric, rack, and switch names may be changed from their default settings as follows:
- On the SFS UI Home page, click 1. Update Default Fabric, Switch Names and Descriptions to open the Set Fabric and Switch Name window.
- On the Network Fabric page, update the fabric Name (optional) and Description (optional) and click NEXT.
Note: The Network Fabric ID is automatically set to 100 and cannot be changed. All directly connected switches in SmartFabric mode join this fabric.
- On the Racks page, update the Name (recommended) and Description (optional) of the rack. In this example, the rack name is set to Rack 1, as shown in Figure 17.
- Click NEXT.
- On the Switches page, update the Name (recommended, if not previously configured from the CLI) and Description (optional) of the switches. Hostnames are set to S5248F-Leaf1A and S5248F-Leaf1B as shown in the image below:
- Click FINISH to apply the settings.