Home > Communication Service Provider Solutions > Telecom Multicloud Foundation > Red Hat > Guides > Red Hat Open Shift Container Platform Guides > Deployment Guide: Red Hat OpenShift Container Platform Reference Architecture for Telecom > Configuring the Dell EMC switches
This section describes the Dell EMC Networking OS10 initial out-of-band (OOB) management IP setup. Perform the following steps to set an IP address to the management network. Modify the sample configuration files as needed and copy the modified switch config file to the switches as running-config.
To configure the switches:
The following example shows an S5232F-1 switch:
OS# configure terminal
OS(config)# hostname S5232F-1
S5232F-1(config)# interface mgmt 1/1/1
S5232F-1(conf-if-ma-1/1/1)# no shutdown
S5232F-1(conf-if-ma-1/1/1)# no ip address dhcp
S5232F-1(conf-if-ma-1/1/1)# ip address 192.168.33.44/24
S5232F-1(conf-if-ma-1/1/1)# exit
S5232F-1(config)# management route 0.0.0.0/0 192.168.33.1