The Dell EMC Safety & Security Lab is constantly being upgraded to the most recent software releases.
In order to test this solution, the Dell EMC Safety and Security Lab was configured as follows:
Virtualized environment:
- 4 vCPUs
- 8 GB memory
- Network adapter type: VMXNET3 - 10 GbE
- Isolated VLAN for storage (if not FC)
Physical/Baremetal minimum environment:
- 8 Cores
- 32 GB memory
Network environment:
- Network adapter type: 10 GbE
- Camera user VLAN
- Storage VLAN
The Dell EMC Safety and Security Lab's host hardware met and exceeded the minimum system requirements for an ESXi/ESX installation. The Panasonic recorder VM was running on an ESXi 6.5 host using Cisco UCS B230 Blade Servers, and various Dell EMC servers, such as the Dell EMC FC630s, FC430s, and R730xd.