Home > Storage > PowerFlex > White Papers > Red Hat OpenShift 4.12 deployment on Dell PowerFlex 4.5 > OpenShift Ingress/API network configuration
The following is an OpenShift Ingress/API network configuration YAML file on one of the nodes. Copy and paste the following YAML file in the YAML editing box while configuring the static network using the Assisted Installer:
interfaces: - name: ens2f0 description: Ethernet ens2f0 type: ethernet state: up ipv4: enabled: false mtu: 1500 - name: ens3f0 description: Ethernet ens3f0 type: ethernet state: up ipv4: enabled: false mtu: 1500 - name: bond0 description: Bond with ports ens2f0 and ens3f0 type: bond state: up ipv4: enabled: false link-aggregation: mode: 802.3ad options: miimon: '100' port: - ens2f0 - ens3f0 mtu: 1500 - name: bond0.105 description: vlan 205 using bond0 type: vlan state: up ipv4: address: - ip: 172.16.105.192 prefix-length: 24 enabled: true vlan: base-iface: bond0 id: 205 mtu: 1500 routes: config: - destination: 0.0.0.0/0 next-hop-address: 172.16.105.10 next-hop-interface: bond0.105 dns-resolver: config: search: - ocp412.com server: - 172.16.105.191 - 100.80.112.1 |