Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Integrated Data Protection Appliance with PowerProtect Data Manager Best Practices
Executive summary Introduction PowerProtect Data Manager with IDPA Technical considerations and deployment Interoperability and limits
Interoperability and limits
Summary Technical support and resources

Interoperability and limits

Home > Data Protection > PowerProtect Data Manager > White Papers > Integrated Data Protection Appliance with PowerProtect Data Manager Best Practices > Interoperability and limits

Interoperability and limits

  • The PowerProtect Data Manager with IDPA solution has the following the minimum software requirements:

    • PowerProtect Data Manager 19.5
    • Data Protection Central 19.3 (external)
    • Data Protection Advisor 19.3 (external)
    • Data Protection Search 18.2/19.1/19.2/19.3 (depending on IDPA models)

    According to the architecture of PowerProtect Data Manager, for each policy, there is a Storage-Unit that is created on the embedded Data Domain system. You must ensure that you do not run out of Storage-Unit space on the embedded Data Domain system.

    The following figure (from E-Lab Navigator) shows the maximum number of MTrees that can be created on the embedded Data Domain system and the total number of MTrees that can be active for both read and write operation.

    Figure 4.   Interoperability and limits

    Note: One MTree is always reserved for the IDPA backup server.