Home > Storage > PowerFlex > White Papers > Implementing Dell PowerFlex SRA with VMware Site Recovery Manager > Logging
The PowerFlex SRA does not offer any additional logging parameters, but one can adjust SRM logging for any storage provider such as the PowerFlex SRA that is installed in the appliance. The following section describes these changes.
With VMware SRM the logging level is altered from the GUI and does not require a restart of the SRM process.
To alter the logging level of all SRAs in the environment, in SRM navigate to Site Pair > Configure > Advanced Settings > Log Manager as shown on the left-hand side in Figure 67. Highlight the logManager.StorageProvider option and select EDIT button in the top right-hand corner. Modify the level as required on each SRM site.
The logs for SRM are located on the appliance in the following directory: /opt/vmware/support/logs/srm.
In general, rather than retrieving logs from the appliance, it is easier to generate a support bundle from within SRM that includes all the necessary log files for debugging. Figure 68 shows the location in the SRM Appliance Management screen for log generation. The bundle can be downloaded locally when complete.