There are several options for the installation and upgrading of SmartFabric OS10. It may be installed manually using the onie-nos-install <URL> command while in ONIE, and can be upgraded from the OS10# command prompt using the image install and boot system commands. Several protocols are supported for the transfer of SmartFabric OS10 files over the network to the switch. These protocols include TFTP, FTP, HTTP, SCP, and SFTP. You can also copy and install the operating system from a local file using a USB device, or the IMAGE directory on the switch.
This chapter provides two examples detailing the steps required to:
- Update from any installed (non-SmartFabric OS10) operating system to SmartFabric OS10 using ONIE, and a USB device
- Update from one version of SmartFabric OS10 to another using SmartFabric OS10 commands and a TFTP server
If installed, enter the show version command from the OS10# command prompt to view the current version of SmartFabric OS10 on the switch. In the example below, the current operating system version is 10.4.0E(R3).
OS10# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.0E(R3)
Build Version: 10.4.0E(R3.233)
Build Time: 2018-03-30T18:05:41-0700
System Type: S4148F-ON
Architecture: x86_64
Up Time: 22:02:22
For details regarding SmartFabric OS10 installation and updates not covered in this Quick Start Guide, see the Getting Started chapter of the SmartFabric OS10 User Guide. For information about updating or installing SmartFabric OS10 using a Zero Touch Deployment through ONIE, see the ONIE User Guide.