Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deploying SingleStore Database on Dell PowerFlex 3.6
Introduction Product overview Solution architecture SingleStore cluster deployment on PowerFlex Testing and validation Conclusion Appendix Best practices
Best practices
PowerFlex rack best practices
PowerFlex best practices
PowerFlex networking and server nodes best practices
SingleStore best practices
References

PowerFlex best practices

Home > Storage > PowerFlex > White Papers > Deploying SingleStore Database on Dell PowerFlex 3.6 > PowerFlex best practices

PowerFlex best practices

  • The following best practices are recommended for the PowerFlex system:

    • Configure the high-performance profile for MDM, SDS, and SDC.
    • Disable the Read Flash Cache and Read RAM cache for all flash clusters. 
    • Sometimes, increasing the device queue depth value to 256 can improve I/O concurrency.
    • Create thick provisioned volumes.

    Note: The parameters can be set from the PowerFlex CLI.

    •  Run the following command to increase the SDS threads to twelve.

    scli --set_performance_parameters --all_sds --tech --sds_number_os_threads 12