The SmartFabric OS10 management interface provides out-of-band (OOB) management access to the network device.
Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Dell Technologies Ansible Proof-of-Concept Deployment Guide > Configure the management interface
The SmartFabric OS10 management interface provides out-of-band (OOB) management access to the network device.
OS10(conf-if-ma-1/1/1)#interface mgmt 1/1/1
OS10(conf-if-ma-1/1/1)#no ip address dhcp
By default, a DHCP client is enabled on the management interface.
OS10(conf-if-ma-1/1/1)#ip address 100.94.107.15/24
OS10(conf-if-ma-1/1/1)#no shutdown
OS10(config)#management route 0.0.0.0/0 100.94.107.254