The following commands allow the user to view SmartFabric Services configuration information. These commands can also be used for troubleshooting.
These commands are available in OS10.5.0.1 and later.
show smartfabric uplinks
The show smartfabric uplinks command is used to verify the uplinks configured across the nodes in the fabric. This displays name, description, ID, media type, native VLAN, configured interfaces, and network profile associated with the fabric. The configured interface shown below shows the interfaces that connect the MX switches to the ACI system.
MX9116n-1# show smartfabric uplinks
-----------------------------------------------------------------------
Name : Uplink01
Description :
ID : ffa4bdfd-fd4a-4301-877a-860c93f9df39
Media Type : ETHERNET
Native Vlan : 1
Untagged-network :
Networks : ec1c6d5e-3945-41c1-92d2-371e5215c911
Configured-Interfaces : 87QLMR2:ethernet1/1/41, 87QLMR2:ethernet1/1/42,
87QMMR2:ethernet1/1/41, 87QMMR2:ethernet1/1/42
-----------------------------------------------------------------------
show smartfabric networks
The show smartfabric networks command displays all of the network profile information such as the name, type, QoS priority, and VLAN.
The output below shows each of the VLANs that were created for this environment.
MX9116n-1# show smartfabric networks
-----------------------------------------------------------------------
Name Type QosPriority Vlan
web GENERAL_PURPOSE SILVER 1614
db GENERAL_PURPOSE SILVER 1616
VLAN001 GENERAL_PURPOSE BRONZE 1
app GENERAL_PURPOSE SILVER 1615
vMotion VM MIGRATION PLATINUM 1612
ESXi_Mgmt HYPERVISOR_MANAGEMENT PLATINUM 1611
vSAN STORAGE_DATA_REPLICATION PLATINUM 1613
-----------------------------------------------------------------------