The deployment in this document is divided into two Solutions—a MX 25 GbE Solution in Full switch mode and SmartFabric mode and a MX 100 GbE Solution in Full switch mode only.
Before beginning the SmartFabric deployment on MX 25 GbE, ensure that the requirements and guidelines in this section are followed.
Configuration of SmartFabric on PowerEdge MX with Cisco ACI makes the following assumptions:
- All MX7000 chassis and management modules are cabled correctly and in a multichassis management group.
- PowerEdge and Cisco ACI platforms are healthy.
- VLTi cables between MX switches have been connected.
- OpenManage Enterprise Modular is at version 1.20.10 or later, and SmartFabric OS10 is at version 10.5.1.6 or later.