The following sections provide SmartFabric leaf switch commands and output from the completed deployment example for reference.
show vlan
This section shows the output of the show vlan command from each of the four-leaf switches used in this example. The NSX VLANs and their ports are underlined. The Ethernet ports are connected to VxRail nodes as shown in Figure 1.
Leaf1A# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated,
S - VLAN-Stack VLAN
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
2500 Active vlan2500 T Eth1/1/1-1/1/4
T Po1000
2711 Active vlan2711 T Eth1/1/1-1/1/4
2713 Active vlan2713 T Eth1/1/1-1/1/4
T Po1000
4000 Active vlan4000 T Po96-97,1000
4001 Active vlan4001 A Po96
4002 Active vlan4002 A Po97
* 4089 Active vlan4089 A Po1000
4090 Active vlan4090 T Po1000
4094 Active T Po1000
Leaf1B# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated,
S - VLAN-Stack VLAN
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
2500 Active vlan2500 T Eth1/1/1-1/1/4
T Po1000
2712 Active vlan2712 T Eth1/1/1-1/1/4
2713 Active vlan2713 T Eth1/1/1-1/1/4
T Po1000
4000 Active vlan4000 T Po96-97,1000
4001 Active vlan4001 A Po96
4002 Active vlan4002 A Po97
* 4089 Active vlan4089 A Po1000
4090 Active vlan4090 T Po1000
4094 Active T Po1000
Leaf2A# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated,
S - VLAN-Stack VLAN
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
2600 Active vlan2600 T Eth1/1/1-1/1/3
T Po1000
2721 Active vlan2721 T Eth1/1/1-1/1/3
2723 Active vlan2723 T Eth1/1/1-1/1/3
T Po1000
4000 Active vlan4000 T Po96-97,1000
4001 Active vlan4001 A Po96
4002 Active vlan4002 A Po97
* 4089 Active vlan4089 A Po1000
4090 Active vlan4090 T Po1000
4094 Active T Po1000
Leaf2B# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated,
S - VLAN-Stack VLAN
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
2600 Active vlan2600 T Eth1/1/1-1/1/3
T Po1000
2722 Active vlan2722 T Eth1/1/1-1/1/3
2723 Active vlan2723 T Eth1/1/1-1/1/3
T Po1000
4000 Active vlan4000 T Po96-97,1000
4001 Active vlan4001 A Po96
4002 Active vlan4002 A Po97
* 4089 Active vlan4089 A Po1000
4090 Active vlan4090 T Po1000
4094 Active T Po1000
show ip bgp summary
This section shows the output of the show ip bgp summary command from each of the four-leaf switches used in this example. The leaf switch BGP peer sessions with the Tier-0 gateways on the NSX edge VMs are underlined and are up.
Leaf1A# show ip bgp summary
BGP router identifier 172.16.128.0 local AS number 65011
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
172.16.0.0 65011 8065 8081 4d:17:42:13 12
172.27.11.2 65003 14570 16849 16:11:02 4
172.27.11.3 65003 14570 16873 16:11:03 4
192.168.1.0 65101 6808 7831 4d:17:23:53 4
192.168.2.0 65101 6807 7824 4d:17:23:01 4
Leaf1B# show ip bgp summary
BGP router identifier 172.16.128.1 local AS number 65011
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
172.16.0.1 65011 8078 8063 4d:17:40:11 12
172.27.12.2 65003 14542 16814 16:09:04 10
172.27.12.3 65003 14543 16819 16:09:05 10
192.168.1.2 65101 6804 7838 4d:17:20:06 4
192.168.2.2 65101 6803 7827 4d:17:19:23 4
Leaf2A# show ip bgp summary
BGP router identifier 172.16.128.0 local AS number 65011
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
172.16.0.1 65012 28255 28278 2w:3d:01:06:47 29
172.16.0.5 65012 28241 28257 2w:3d:01:06:47 29
172.16.0.15 65011 28760 28746 2w:3d:01:07:16 36
172.27.21.2 65004 1340 1546 01:29:06 2
172.27.21.3 65004 1340 1555 01:29:05 2
Leaf2B# show ip bgp summary
BGP router identifier 172.16.128.5 local AS number 65011
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
172.16.0.14 65011 28745 28762 2w:3d:01:07:40 36
172.16.0.17 65012 28274 28289 2w:3d:01:07:09 35
172.16.0.19 65012 28249 28246 2w:3d:01:06:14 35
172.27.22.2 65004 1351 1568 01:29:30 6
172.27.22.3 65004 1351 1563 01:29:29 6
show bfd neighbors
This section shows the output of the show bfd neighbors command from each of the four-leaf switches used in this example. The leaf switch BFD sessions with the NSX edge VMs are up. For the sessions to come up, BFD must be enabled on the NSX Tier-0 gateways as shown in VMware Cloud Foundation 4.5 on Dell VxRail.
Leaf1A# show bfd neighbors
* - Active session role
--------------------------------------------------------------------------------
LocalAddr RemoteAddr Interface State RxInt TxInt Mult VRF Clients
--------------------------------------------------------------------------------
* 172.27.11.1 172.27.11.2 vlan2711 up 500 500 3 default bgp
* 172.27.11.1 172.27.11.3 vlan2711 up 500 500 3 default bgp
Leaf1B# show bfd neighbors
* - Active session role
--------------------------------------------------------------------------------
LocalAddr RemoteAddr Interface State RxInt TxInt Mult VRF Clients
--------------------------------------------------------------------------------
* 172.27.12.1 172.27.12.2 vlan2712 up 500 500 3 default bgp
* 172.27.12.1 172.27.12.3 vlan2712 up 500 500 3 default bgp
Leaf2A# show bfd neighbors
* - Active session role
--------------------------------------------------------------------------------
LocalAddr RemoteAddr Interface State RxInt TxInt Mult VRF Clients
--------------------------------------------------------------------------------
* 172.27.21.1 172.27.21.2 vlan2721 up 500 500 3 default bgp
* 172.27.21.1 172.27.21.3 vlan2721 up 500 500 3 default bgp
Leaf2B# show bfd neighbors
* - Active session role
--------------------------------------------------------------------------------
LocalAddr RemoteAddr Interface State RxInt TxInt Mult VRF Clients
--------------------------------------------------------------------------------
* 172.27.22.1 172.27.22.2 vlan2722 up 500 500 3 default bgp
* 172.27.22.1 172.27.22.3 vlan2722 up 500 500 3 default bgp
