Home > Networking Solutions > Campus Switches and Solutions > Campus and Mobility Networking Solutions > Guides > ClearPass NAC and Posture Assessment for Campus Networks Deployment Guide > Dell W-ClearPass configuration – instant
The W-Instant example heavily leverages the controller-based configuration for the W-ClearPass portion.
All Services, Roles, Role Mappings, Posture Policies, Enforcement Polices and Enforcement Profiles can be used exactly as they are configured in the Dell W-ClearPass configuration – wireless section. The web login page used for the captive portal can also be used again.
Note: If the example from the Dell W-ClearPass configuration – wireless section was completed, the services can be kept active and used with the Instant example within this chapter. If you have not competed those steps, go back to the Dell W-ClearPass configuration – wireless section once the network device setting has been completed. Verify that all named settings from both examples correlate with any uniquely named settings used during your configuration.
The only additional configuration needed is to add the W-Instant APs as Network Devices. This configuration allows each W-IAP to be identified as a trusted network access device.
The W-IAPs are added to the Configuration > Network > Devices section.
The ClearPass Policy Manager opens.
The Add Device window opens.
Note: Each access point will need to be added to the list. The request originates from the access point IP address, not the common virtual controller IP address.
The W-ClearPass and W-Series configuration in this guide can be tested with any client. The following details the use of a Windows 7 laptop for testing.