Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Architecture Guide—VMware Cloud Foundation on VxRail: VCF 5.x on VxRail 8.x
Executive Summary Architecture Overview Workload Domain Architecture VxRail Virtual Network Architecture Network Virtualization NSX WLD Design
Introduction
Application Virtual Network (AVN)
NSX transport zone design
NSX segments
Uplink profile design
Transport node profiles
NSX Edge Node design
NSX Edge north-south routing design
NSX Mgmt WLD physical network requirements
NSX VI WLD physical network requirements
NSX deployment in Mgmt WLD
NSX deployment in VI WLD
Enabling VCF with Tanzu Features on Workload Domains Physical Network Design Considerations Storage Options Multi-site Design Considerations Operations Management Architecture Lifecycle Management Cloud Management Architecture

NSX segments

Home > Integrated Products > VxRail > Guides > Architecture Guide—VMware Cloud Foundation on VxRail: VCF 5.x on VxRail 8.x > NSX segments

NSX segments

  • Segments are used to connect VMs to Layer 2 networks, and they can be either VLAN or Overlay segments. For the Mgmt WLD, when the NSX Edge Nodes and AVNs are deployed from SDDC Manager, two segments are created for the AVNs—Region A and xRegion—to be used for the vRealize Suite of components. Two segments are created to allow Edge Node traffic to flow through the ESXi hosts to the physical network. The following table shows the segments that are created to support AVN in the virtual infrastructure of the SDDC:

    Table 9.      NSX Segments for Mgmt WLD

    Segment

    Transport zone

    VLAN (example)

    Region A Segment (AVN)

    Overlay

    None

    xRegion Segment (AVN)

    Overlay

    None

    Edge-uplink01

    VLAN (Edge uplink TZ)

    105

    Edge-uplink02

    VLAN (Edge uplink TZ)

    106

    For the VI WLD, the Edge automation is used to deploy the NSX Edges from SDDC Manager. The Edge uplink segments are created at this time. Segments for workloads are created as a Day-2 activity outside of SDDC Manager.