Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Architecture Guide—VMware Cloud Foundation 3.10.01 on VxRail
Executive Summary Architecture Overview Workload Domain Architecture VxRail Virtual Network Architecture Network Virtualization
Introduction to network virtualization
NSX-V components and services
NSX-T architecture
NSX-T network services
NSX-V and NSX-T WLD Design Physical Network Design Considerations Multi-Site Design Considerations Operations Management Architecture Lifecycle Management Cloud Management Architecture

NSX-T architecture

Home > Integrated Products > VxRail > Guides > Architecture Guide—VMware Cloud Foundation 3.10.01 on VxRail > NSX-T architecture

NSX-T architecture

  • NSX-T reproduces the complete set of networking services (such as switching, routing, firewalling, QoS) all in a network virtualization layer which is an abstraction between the physical and virtual networks. The NSX-T platform consists of several components that operate across three different planes: management, control, and data.

    • NSX-T Managers
    • NSX-T Transport Nodes
    • NSX-T Segments (Logical Switches)
    • NSX-T Edge Nodes
    • NSX-T Distributed Routers (DR)
    • NSX-T Service Routers (SR)

    Management plane

    The management plane provides a single API entry point to the system. It is responsible for maintaining user configuration, handling user queries, and performing operational tasks on all management, control, and data plane nodes. It provides an aggregated system view and is the centralized network management component of NSX-T. NSX-T Manager is delivered in a virtual machine form factor and is clustered with three VMs to provide High Availability of the Management plane.

    Control plane

    The control plane computes the runtime state of the system based on configuration from the management plane. It is also responsible for disseminating topology information that is reported by the data plane elements and pushing stateless configuration to forwarding engines. It runs on VLAN backed networks that are isolated from the transport networks for the data plane. NSX-T splits the control plane into two parts:

    • Central Control Plane (CCP)–The CCP is implemented on the NSX-T cluster of managers, the cluster form factor provides both redundancy and scalability of resources. The CCP is logically separated from all data plane traffic, meaning any failure in the control plane does not affect existing data plane operations.
    • Local Control Plane (LCP)–The LCP runs on transport nodes. It is next to the data plane it controls and is connected to the CCP. The LCP programs the forwarding entries of the data plane.

    Data plane

    The data plane performs stateless forwarding or transformation of packets, based on tables that are populated by the control plane. It reports topology information to the control plane and maintains packet level statistics.

    The transport nodes are the hosts running the local control plane daemons and forwarding engines implementing the NSX-T data plane. The N-VDS is responsible for switching packets according to the configuration of available network services.