Home > Networking Solutions > Enterprise/Data Center Networking Solutions > Enterprise SONiC Networking Solutions > Guides > EVPN-VxLAN based Multisite Data Center Interconnect (DCI) using Dell Enterprise SONiC > Show command output from Fabric-A-Leaf1
Use the following commands to show the status of VRF, VLAN and MAC address tab
Fabric-A-Leaf1# show Vlan Q: A - Access (Untagged), T - Tagged NUM Status Q Ports Autostate Dynamic 101 Active A Ethernet16 Enable No 201 Active A Ethernet20 Enable No Fabric-A-Leaf1#
|
Fabric-A-Leaf1# show mac address-table ----------------------------------------------------------- VLAN MAC-ADDRESS TYPE INTERFACE ----------------------------------------------------------- 101 00:0C:29:04:53:EF DYNAMIC Ethernet16 201 00:0C:29:7C:8E:34 DYNAMIC Ethernet20 Fabric-A-Leaf1#
|
Fabric-A-Leaf1# show ip arp vrf VrfTenant1 Type: R - Remote Neighbor entries (EVPN or MC-LAG Separate IP) -------------------------------------------------------------------------------------------------- Address Hardware address Interface Egress Interface Type -------------------------------------------------------------------------------------------------- 192.168.10.1 00:0c:29:04:53:ef Vlan101 Ethernet16 Dynamic |