Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below

Home > Networking Solutions > Modular/Blade Switches > FN-Series Blade Switches (PowerEdge FX2)

FN-Series Blade Switches (PowerEdge FX2)

Hybrid 2U rack integrated solution delivering scalable performance with rack flexibility for demanding workloads.

FX2 Storage Networking with FC(NPG)

This guide provides assistance for a step-by-step deployment of Fibre Channel using Dell PowerEdge FX2s and Dell EMC Unity 500F.
Dell EMC FX2s VSAN with FNIOM's Stacked

This guide presents configuration steps to get a VMware Virtual SAN (VSAN) running for evaluating VMware VSAN in a PowerEdge FX2s with stacked FN410T switche
Dell EMC NSX Reference Architecture - FC430 Compute Nodes with VSAN Storage

This guide covers an NSX deployment for the data center based on the Dell EMC Validated System for Virtualization.
PowerEdge FX2 - FN I/O Module - VLT Deployment Guide

This deployment guide will provide a step-by-step configuration in the data center utilizing the FN I/O Module, the PowerEdge FN410S.
FN-IOM Fibre Channel Storage Direct Connect Deployment Guide

This guide focuses on data center Ethernet and storage Fibre Channel(FC) networks and the ability of the FN2210S I/O Module to handle Ethernet and Fibre Channel traffic, while also providing fabric services that enables direct connectivity to FC storage.
PowerEdge FX2 - Upgrading from 10GbE Pass-through Modules to FN410S I/O Modules

This deployment guide covers a step-by-step procedure to minimize network downtime when upgrading from Dell 10 Gigabit Ethernet (10GbE) Pass-through Modules(PTMs) to PowerEdgeFN410S Input/OutputModules (IOMs)in aPowerEdgeFX2 chassis.
FN-IOM Easy Deployment Guide

Configuring upstream switch ports and bringing up the server-facing ports on FN IOMs in the PowerEdge FX2 chassis