Dell SmartFabric OS10 Enterprise Edition Quick Start and Interoperability Guide

• 1

  Notes, cautions, and warnings

• 1

  Introduction
• 2

  Dell switches used in this guide
• 3

  Cisco Nexus switches

• 1

  SmartFabric OS10 Installation and Upgrades
• 2

  Preparation
• 3

  Upgrade from non-OS10 operating system to SmartFabric OS10 using ONIE
• 4

  Upgrade SmartFabric OS10 to a current version using SmartFabric OS10 commands
• 5

  Zero-touch deployment
• 6

  Troubleshooting SmartFabric OS10 installations

• 1

  Management network
• 2

  OOB management network configuration
• 3

  In-band management configuration
• 4

  Serial port management

• 1

  Security basics
• 2

  VTY ACLs
• 3

  RADIUS, TACACS+, and local authentication
• 4

  Management VRF

• 1

  Connecting Dell switches
• 2

  Port Channels
• 3

  VLANs
• 4

  Spanning Tree
• 5

  VLT

• 1

  Connect Dell to third-party switches
• 2

  Port channels
• 3

  VLANs
• 4

  Spanning tree protocol

• 1

  Technical Support and Resources
• 2

  Hardware and software versions used in this document
• 3

  Support and feedback