Dell EMC Networking SmartFabric Services Deployment with VxRail 7.0.202 Deployment Guide

• 1
  Notes, cautions, and warnings

• 1
  Purpose of this guide
• 2
  Dell Technologies
• 3
  VxRail
• 4
  SmartFabric Services
• 5
  SmartFabric Services with VxRail
• 6
  OpenManage Network Integration
• 7
  Typographical conventions

• 1
  Hardware used in this guide

• 1
  Overview
• 2
  Production topology with SmartFabric Services
• 3
  Production topology connection details
• 4
  OOB management topology
• 5
  OOB management connection details

• 1
  Minimum requirements
• 2
  Unsupported environments
• 3
  Unsupported features
• 4
  Production topology deployment options
• 5
  Uplink options
• 6
  External switches
• 7
  VLANs and IP addresses
• 8
  VxRail deployment settings - first cluster
• 9
  VxRail deployment settings - second cluster
• 10
  DNS server records - first cluster
• 11
  DNS server records - second cluster

• 1
  Cabling
• 2
  Configure leaf switch OOB management interfaces
• 3
  Enable SmartFabric
• 4
  Connect to the SmartFabric UI
• 5
  Update fabric and switch names
• 6
  Configure L2 uplinks to the external network
• 7
  Configure L3 routed uplinks to the external network
• 8
  Configure a jump host port

• 1
  Initial VxRail cluster deployment steps
• 2
  Additional configuration steps for L3 uplinks
• 3
  Validate and build VxRail cluster

• 1
  Expand SmartFabric and VxRail cluster to multirack
• 2
  Verify preferred master setting before fabric expansion
• 3
  Configure management settings for new switches
• 4
  Add switches to SmartFabric
• 5
  Connect to the SmartFabric UI
• 6
  Configure additional rack and switch names
• 7
  Configure leaf switch addresses for L3 uplinks
• 8
  Add a VxRail node to the cluster

• 1
  Add a second VxRail cluster
• 2
  Change jump host VLAN
• 3
  Deploy second VxRail cluster

• 1
  Deploy OMNI VM
• 2
  OMNI console configuration
• 3
  OMNI web UI configuration
• 4
  Register vCenter Server in OMNI

• 1
  General
• 2
  Dell EMC PowerSwitch systems
• 3
  VxRail E560F nodes
• 4
  VxRail appliance software
• 5
  OMNI software

• 1
  Switch CLI validation commands
• 2
  Return to Full Switch mode

• 1
  Configure external Nexus switches for L3 routed connections
• 2
  Configure external Nexus switches for L2 connections
• 3
  Validated Nexus switches

• 1
  Technical resources
• 2
  Fabric Design Center
• 3
  Feedback and technical support