-
- Attach the installation media.
- Boot the server.
- Select the installation media.
- At the VMware Installer screen, press Enter.
- At the EULA screen, press F11 to Accept and Continue.
- Under Storage Devices, select the appropriate virtual disk, and press Enter.
- Select US as the keyboard layout, and press Enter.
- Enter the root password twice, and press Enter.
- Press F11 to start the installation.
- After the server reboots, press F2, and enter root credentials.
- Select Configure Management Network, and press Enter.
- Select the appropriate network adapter, and click OK.
- Select IPv4 settings, and enter the desired IP address, subnet mask, and gateway for the server.
- Select OK, and restart the management network.