Home > Servers > Systems Management > White Papers > Server Configuration Profiles: Reference Guide > Troubleshooting
This section provides examples of possible error scenarios during configuration of Telemetry and custom Metric Report Definitions.
If the data center license is missing, the configuration results will show a SYS319 message ID for CustomComponents.
SYS319 - The operation cannot be completed because either the required license is missing or expired.
racadm>>lclog viewconfigresult ‐j JID_034847857859 SeqNumber = 8049
FQDD = iDRAC.Embedded.1
Job Name = Import Configuration Operation Name = CHANGE
DisplayValue = iDRAC.Embedded.1#CustomComponents Name = CustomComponents
OldValue = ""
NewValue = ""
Status = Failure
MessageID = SYS319
ErrCode = 12562
If the Telemetry feature is not enabled, the configuration results will show a SYS460 message ID for CustomComponents.
SYS460 - Unable to perform the necessary telemetry operation because the Telemetry feature is disabled.
racadm>>lclog viewconfigresult ‐j JID_034845831354 SeqNumber = 8002
FQDD = iDRAC.Embedded.1
Job Name = Import Configuration Operation Name = CHANGE
DisplayValue = iDRAC.Embedded.1#CustomComponents Name = CustomComponents
OldValue = ""
NewValue = ""
Status = Failure
MessageID = SYS460
ErrCode = 10376
If the CustomComponents element is in a template imported to any iDRAC version earlier than iDRAC9 v4.40, the resulting job status will be Failed with a message ID of SYS047.
SYS047 - Input file for import configuration is not compliant with configuration schema.
racadm>>jobqueue view ‐i JID_035451979234
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ JOB ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
[Job ID=JID_035451979234]
Job Name=Configure: Import Server Configuration Profile Status=Failed
Scheduled Start Time=[Not Applicable] Expiration Time=[Not Applicable]
Actual Start Time=[Sat, 24 Oct 2020 08:13:17]
Actual Completion Time=[Sat, 24 Oct 2020 08:13:18]
Message=[SYS047: Input file for import configuration is not compliant with configuration schema.]
Percent Complete=[100]