Home > Servers > Systems Management > White Papers > Server Configuration Profiles: Reference Guide > Example
Telemetry attributes are in the template under the iDRAC.Embedded.1 component.
<Component FQDD="iDRAC.Embedded.1">
<Attribute Name="Telemetry.1#EnableTelemetry">Enabled</Attribute>
<Attribute Name="Telemetry.1#RSyslogServer1">10.35.xxx.xxx</Attribute>
<Attribute Name="Telemetry.1#RSyslogServer1Port">xxxx</Attribute>
<Attribute Name="Telemetry.1#RSyslogServer2">10.35.xxx.xxx</Attribute>
<Attribute Name="Telemetry.1#RSyslogServer2Port">xxxx</Attribute>
<Attribute Name="TelemetryCPUSensor.1#EnableTelemetry">Enabled</Attribute>
<Attribute Name="TelemetryCPUSensor.1#ReportInterval">600</Attribute>
<Attribute Name="TelemetryCPUSensor.1#RsyslogTarget">TRUE</Attribute>
<Attribute Name="TelemetryCPUSensor.1#ReportTriggers">TMPCpuCriticalTrigger</Attribute>
</Component>
When SCP Import is successful, the configuration results contain an entry for each successfully applied attribute. The following example enables the Telemetry feature:
racadm>>lclog viewconfigresult ‐j JID_034846688291 SeqNumber = 8008
FQDD = iDRAC.Embedded.1
Job Name = Import Configuration Operation Name = CHANGE
DisplayValue = Enable Telemetry
Name = Telemetry.1#EnableTelemetry
OldValue = Disabled
NewValue = Enabled
Status = Success
ErrCode = 0