Home > Servers > Systems Management > White Papers > Server Configuration Profiles: Reference Guide > EventFilters
EventFilters settings can be configured using SCP Import and are found under these six components:
<Component FQDD="EventFilters.SystemHealth.1">
<Component FQDD="EventFilters.Storage.1">
<Component FQDD="EventFilters.Updates.1">
<Component FQDD="EventFilters.Audit.1">
<Component FQDD="EventFilters.Configuration.1">
<Component FQDD="EventFilters.WorkNotes.1"/>
The SCP template contains many event filters. To help navigate this large array of settings, they are broken down into categories. The three major categories of each setting are Critical (1), Warning (2) and Informational (3). The settings that are available under each category vary depending on the event filter.
Following is an example of a power event filter under the Informational (3) category. Each grouping starts with a commented out DisplayName attribute stating the category. This attribute, which is used to assist in navigating the settings, cannot be set.
<!‐‐ <Attribute Name="PWR_5_3#DisplayName">PWR_5_3 (Informational)</Attribute> ‐‐>
<Attribute Name="PWR_5_3#Alert#Email">Disabled</Attribute>
<Attribute Name="PWR_5_3#Alert#SNMP">Disabled</Attribute>
<Attribute Name="PWR_5_3#Alert#IPMI">Disabled</Attribute>
<Attribute Name="PWR_5_3#Alert#SysLog">Disabled</Attribute>
<Attribute Name="PWR_5_3#Alert#WSEventing">Disabled</Attribute>
<Attribute Name="PWR_5_3#Alert#OSLog">Disabled</Attribute>
<Attribute Name="PWR_5_3#Alert#RedfishEventing">Enabled</Attribute>
<Attribute Name="PWR_5_3#Action">No Action</Attribute>
Each of the event filters settings can be switched, and an action can be set to perform when one of these events is triggered. The available Action settings are:
All action options might not be applicable to an event filter. For more information about event filters, see the iDRAC User’s Guide.