Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2 > Deploy the NSX-T edge appliances
To provide tenant workloads with routing services and connectivity to networks that are external to the workload domain, deploy two NSX-T Edge nodes. Table 12 shows the values that are used for the edge nodes.
Table 12. Uplink profiles
Setting |
Value for sfo01wesg01 |
Value for sfo01esg02 |
Hostname |
sfo01wesg01.sfo01.rainpole.local |
sfo01wesg02.sfo01.rainpole.local |
Port Groups |
sfo01-w-nvds01-management |
sfo01-w-nvds01-management |
Primary IP Address |
172.16.41.21 |
172.16.41.22 |
Table 13 shows the networks that the four uplinks on each ESG are attached to both ESG use the same values.
Table 13. Edge cluster profile settings
Source network |
Destination network |
Network 3 |
sfo01-w-nvds01-uplink02 |
Network 2 |
sfo01-w-nvds01-uplink01 |
Network 1 |
sfo01-w-overlay |
Network 0 |
sfo01-w-nvds01-management |