Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2 > Create transport zones
Table 8 shows the values that are used when creating two extra transport zones for uplinks. VMware Cloud Foundation on VxRail automatically created a transport zone that is associated with the transport zone profile called vlan-tz-<UID> as well as the overlay-tz -<UID>, where UID is a system-generated identifier. Two uplinks transport zones need to be defined. Each associated a separate NSX-T Virtual Distributed Switch (N-VDS). Each N-VDS is configured to carry VLAN traffic. See Create transport zones for step by step instructions.
Table 8. Edge transport zones
Name |
N-VDS name |
N-VDS mode |
Traffic type |
sfo01-w-uplink01 |
sfo01-w-uplink01 |
Standard |
VLAN |
sfo01-w-uplink02 |
sfo01-w-uplink02 |
Standard |
VLAN |