Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2 > Create and configure the Tier-0 gateway
The Tier-0 gateway in the NSX-T Edge cluster provides a gateway service between the logical and physical network. The NSX-T Edge cluster can back multiple Tier-0 gateways. In this example, each edge node hosts a Tier-0 gateway, and ECMP is used to create multiple paths to the two leaf switches in the rack. See Create and configure the Tier-0 gateway for step-by-step instructions. In this example, no changes were made to the values found in the VMware Validated Design.
Figure 26. NSX-T Edge Cluster
Note: For step-by-step CLI configuration of the leaf switches, see Configure leaf switch NSX-T overlay networking.