Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Validation Guide—SAP HANA on Dell EMC PowerEdge for VMware vSAN Hyperconverged Infrastructure
Introduction Technology overview
Introduction
System components
Sizing
CPU and memory
Supported memory configurations
PowerEdge for vSAN Ready Nodes per cluster
SAP HANA VMs per node and per socket
Disks
Network
Configuring SAP HANA virtual machines Solution health monitoring and support References

System components

System components

  • The following table shows the components that are certified for this SAP HANA solution:

    Table 1.      SAP HANA certified solution components and configurations

    Component/Configuration

    Details

    Compute

    • R840 vSAN Ready Node
    • R740xd vSAN Ready Node

    Compute configuration

    All-flash only; hybrid vSAN Ready Node configurations not supported

    CPU architecture

    Intel Xeon Scalable processors (Skylake and Cascade Lake)–Silver, Gold, Platinum

    Storage

    • Local SSD/NVMe drives for capacity tier
    • NVMe drives for caching tier (Optane SSDs are optional)

    Storage virtualization

    VMware vSAN

    vSAN cluster size
    • Minimum: 4 vSAN Ready Nodes
    • Maximum: 64 vSAN Ready Nodes

    Networking

    25 GbE

    Hypervisor support

    VMware vSphere 6.5 and 6.7

    Management infrastructure

    VMware vCenter, Dell EMC PowerEdge iDRAC

    PowerEdge management

    Dell EMC OpenManage Integration for VMware vCenter (see the VMware Compatibility Guide for certified firmware and drivers)