Every SAP HANA node requires storage devices and capacity for:
When the SAP HANA nodes boot from a volume on PowerStore (boot from SAN), the required capacity for the operating system must be included in the overall capacity calculation for the SAP HANA installation. Every SAP HANA node requires approximately 100 GB capacity for the operating system, including space for the /usr/sap/ directory.
The SAP HANA in-memory database requires disk storage to:
Every SAP HANA scale-up or scale-out (worker) node requires two disk volumes or file systems to save the in-memory database on disk (data) and to keep a redo log (log). The size of these volumes or file systems depends on the anticipated total memory requirement of the database and the RAM size of the node. To assist with disk sizing preparation, SAP provides several tools and documents, as described in . The latest version of the requirements document (version 2.10) provides the following formulas to calculate the size of the data volume:
Sizedata = 1.2 x anticipated net disk space for data
where anticipated net disk space is the anticipated total memory requirement of the database plus an additional 20 percent free space. If the database is distributed across multiple nodes in a scale-out cluster, divide the anticipated net disk space by the number of SAP HANA worker nodes in the cluster. For example, if the anticipated net disk space is 2 TB and the scale-out cluster consists of four worker nodes, then every node must be assigned a 616 GB data volume:
(2 TB / 4 = 512 GB x 1.2 = 616 GB).
If the anticipated net disk space is unknown at the time of the storage sizing, it is recommended to use the RAM size of the node plus 20 percent free space for a capacity calculation of the datafile system.
Sizedata = 1 x RAM
[systems ≤ 512 GB] Sizeredolog = 1/2 x RAM
[systems > 512 GB] Sizeredolog = (min) 512 GB
Before you install the SAP HANA binary, configuration, and trace files and logs, every SAP HANA node must have access to a file system that is mounted under the local /hana/shared/ mount point. In an SAP HANA scale-out cluster, a single shared file system is required and must be mounted on every node. Most SAP HANA installations use a Network File System (NFS) for this purpose. PowerStore unified storage systems can provide this file system with the NAS option.
Sizeinstallation(single-node) = 1 x RAM but max 1 TB
Sizeinstallation(scale-out) = 1 x RAM_of_worker per four worker nodes
SAP HANA supports backup to a file system or the use of third-party tools that SAP has certified. Dell EMC supports data protection strategies for SAP HANA backup using Dell EMC Data Domain systems and Dell EMC NetWorker software. While an SAP HANA backup to an NFS file system on a PowerStore all-flash or hybrid storage system is possible, we do not recommend backing up the SAP HANA database to the storage system where the primary persistence resides. If you plan to back up SAP HANA to an NFS file system on a different PowerStore storage system, see for information about sizing the backup file system. The capacity requirement depends not only on the data size and the frequency of change operations in the database, but also on the backup generations that are kept on disk.