Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Validation Guide—PowerStore Configuration and Deployment Best Practices for SAP HANA TDI
SAP HANA host configuration and setup
Host connection using FC SAN Host configuration Volume creation and mapping Using volumes on the SAP HANA host Creating the SAP HANA shared file system

SAP HANA host configuration and setup

Host configuration

  • After the HBAs of the SAP HANA server have been zoned to the PowerStore FC FE ports, use the PowerStore Manager UI to create a host entry in the PowerStore system and add volumes to the host. Follow these steps:

    1. From the PowerStore Manager UI, select Compute > Host & Host Groups and click +ADD HOST.


    The Add Host dialog is displayed, as shown in the following figure:

    Figure 9.                  Adding the SAP HANA host to PowerStore

    1. Add the following host details and click Next:
    • User-friendly name
    • Host operating system: Linux
    • Optionally, a server description

    The following page is displayed:

    A screenshot of a cell phone Description automatically generated

    Figure 10.               Selecting the host protocol

    1. Select Fibre Channel as the host protocol type and click Next.

    A list of automatically discovered initiators is displayed, as shown in the following figure:

    A screenshot of a social media post Description automatically generated

    Figure 11.               Selecting host initiators

    1. Select the two FC initiators (WWNs) of the SAP HANA host HBAs from the list, and then click Next.

    A Host Summary page is displayed, as shown in the following figure:

    A screenshot of a social media post Description automatically generated

    Figure 12.               Host summary page

    1. Click ADD HOST to complete the process.

next

Volume creation and mapping