Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Validation Guide—PowerEdge Configuration and Deployment Best Practices for SAP HANA TDI
Technology overview
Introduction Dell EMC solutions for SAP HANA Dell EMC appliances for SAP HANA Dell EMC TDI solutions for SAP HANA

Dell EMC TDI solutions for SAP HANA

  • The following table shows the components of a Dell EMC solution for an SAP HANA TDI deployment:

    Table 2.           Configuration of a Dell EMC solution for SAP HANA TDI

    Component

    Description

    Server

    Dell EMC PowerEdge servers listed in Table 3

    CPUs
    • 2 to 4 Intel Xeon Skylake
    • 2 to 4 Intel Xeon Cascade Lake

    Memory
    • Up to 24 DDR4 RDIMMs/LRDIMMs for a 2-CPU socket server
    • Up to 48 DDR4 RDIMMs/LRDIMMs for a 4-CPU socket server

    Operating system

    SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware vSphere (for virtual SAP HANA configurations)

    Infrastructure switches
    • Ethernet fabric: 10 GbE to 200 GbE Dell EMC S-Series and Z-Series data center network switches
    • SAN fabric: Dell EMC Connectrix Fibre Channel (FC), Dell EMC unified S4148U, or MX9116n/MX7116n modular switches

    Storage configuration
    • Local storage: All-flash or a combination of serial-attached storage (SAS) and solid-state device (SSD) drives.
    • External storage: Dell EMC storage arrays

    Backup and disaster recovery
    • SAP HANA system replication
    • Backup and recovery of SAP HANA on the Dell EMC Data Domain appliance

    Solution and hardware life cycle management

    Dell EMC OpenManage

    If you have questions about specific licenses and services, consult your Dell EMC sales representative.