Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Tech Book—Dell Integrated System for Microsoft Azure Stack Hub
Executive summary Solution Overview Prerequisites Hardware Infrastructure Networking and Cabling
Networking and Cabling
Networking
Scale unit node network connectivity
Border connectivity
Dense configuration networking
Hybrid configuration networking
All-flash configuration networking
Azure Stack Hub switch cabling
Border Gateway Protocol routing
Static routing
Transparent proxy
Firewall integration
Deployment
Operations and Management Software Security Maintaining the Solution Backup and Recovery Conclusion License Retrieval Dell Technologies Support and Consulting Offerings

Networking

Networking


  • Overview

    The following figure shows the Azure Stack Hub network topology.

    Figure 34. Azure Stack Hub network topology


    Network transceivers

    Dell Integrated System networking can use several transceiver types depending on customer network requirements. The following table lists the network transceivers that are supported for the solution.

    Note: Uplink connections (from the ToR switches to a customer’s edge devices) can employ the optical transceiver types that are listed in the following table. For the Cisco C93180YC-FX switch, only short-range 25 Gb SFP28+ optical transceivers have been validated.

    Table 28. Supported network transceivers
    SFP module

    S5248F-ON ToR

    Hybrid and all-flash configurations

    Cisco C93180YC-FX ToR

    All-flash configuration

    10 GbE SR LC SFP+ Yes No
    10 GbE LR LC SFP+ Yes No
    25 GbE SR LC SFP28+ Yes Yes
    25 GbE LR LC SFP28+ Yes No
    Note: Cisco switch is only available with the customer-rack option. For details, see Rail kit information.