Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Splunk Enterprise on Dell EMC PowerFlex rack using Isilon
Revisions Acknowledgements Executive summary Introduction Product overview Splunk distributed clustered deployment
Splunk distributed clustered deployment
Virtualization design
Compute design
Storage design
Isilon Storage design
Network architecture
Splunk Enterprise clustered deployment design
Validation Conclusion Appendix A Appendix B: Technical support and resources

Network architecture

Network architecture

  • The following figure demonstrates high-level network architecture and design of Splunk enterprise distributed clustered deployment on PowerFlex rack:

    Figure 4.              Network architecture of PowerFlex rack

    Table 6.              PowerFlex networking details

    Components

    Description

    Cisco Nexus 93180YC-EX

    10 Gbps & 25 Gbps TOR switches

    Cisco Nexus 9332PQ

    40 Gbps Aggregation switches

    Cisco Nexus 3172TQ

    1 Gbps & 10 Gbps Management switches

    Data Domain

    2 x 10 Gbps links

    Application traffic

    2 x 25 Gbps links

    PowerFlex storage traffic

    2 x 25 Gbps links

    Architecture flow:

    • PowerFlex rack uses a pair of Cisco Nexus 93180YC-EX as TOR switches
    • PowerFlex rack uses a pair of Cisco Nexus 9332PQ as Aggregation switches
    • Cisco Virtual Port-Channel is configured between the TOR and Aggregation switches
    • Cisco Nexus 3172TQ switch is used for OOB traffic with 1 GbE dedicated network
    • Each node consists of four 25 GbE ports, two ports connected to each TOR (Cisco Nexus 93180YC-EX) switch
    • Both TOR (Cisco Nexus 93180YC-EX) switches have uplinks to aggregation (Cisco Nexus 9332PQ) switches for redundancy and network bandwidth aggregation

    For an overview of PowerFlex rack tech extension with Isilon, see Dell EMC PowerFlex rack Technology Extension with Isilon storage.