Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Solution Guide—Storage Configuration Best Practices for SAP HANA TDI on Unity Storage Systems
Executive summary Introduction Technology overview and considerations Storage design recommendations for Dell EMC Unity arrays for SAP HANA Configuring Unity storage for HANA using Dell EMC Unisphere for Unity
Overview
Creating a host
Creating a traditional pool
Creating a dynamic pool
Creating a volume and mapping to the SAP HANA node
Enabling FAST VP
Creating a NAS server
Creating a file system and NFS share
Accessing Unity storage from the SAP HANA nodes Conclusion References

Overview

Overview

  • The Unity internal architecture eliminates complex configurations and tuning steps. You can use Dell EMC Unisphere for Unity to complete the integral storage configuration tasks required to:

    • Create the SAP HANA hosts
    • Create a storage pool:
      • Traditional pool
      • Dynamic pool
    • Create a NAS Server
    • Create a file system and NFS share
    • Create SAP HANA volumes and map the volumes to the
      SAP HANA nodes
    • Configure FAST VP

    Figure 6 shows the Unisphere for Unity interface that enables you to perform these tasks.

    Figure 6.        Dell EMC Unisphere for Unity

    Use the step-by-step instructions in the following sections as an example.