Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Ransomware Protection: Secure Your Data on Dell PowerFlex with Dell PowerProtect Cyber Recovery
Executive summary Introduction PowerFlex product overview Dell PowerProtect Cyber Recovery Logical air gap Solution deployment Installing the Dell PowerProtect Cyber Recovery software Deploy Dell PowerProtect DD Series in a Dell PowerProtect Cyber Recovery Vault Integrating vault storage and applications with Dell PowerProtect Cyber Recovery Dell PowerProtect Cyber Recovery policies and actions Data Analysis using CyberSense Conclusion Configuration details
Storage only and compute only nodes
Dell PowerProtect Cyber Recovery virtual appliance
References

Storage only and compute only nodes

Storage only and compute only nodes

  • The following tables provide the configuration details of a Dell PowerFlex storage-only and compute-only nodes:

    Table 2.      Dell PowerFlex storage-only nodes

    Hardware

    Configuration

    CPU Cores 

    2 x Intel(R) Xeon(R) Gold 6126 CPU @ 2.60 GHz 

    Memory 

    14 x 16 GB

    NIC 

    2 x Mellanox ConnectX-4 LX 25 GbE SFP Adapter

    1 x Intel(R) Ethernet 10G 4P X710/I350 rNDC

    Storage 

    BOSS S1 Controller 2 x 240 GB SATA SSD 

    Dell HBA330 controller 8 x 1.9 TB SAS SSD 

    Operating system 

    Embedded operating system 

    PowerFlex 

    3.5.1.2

    Note: In a Dell PowerFlex storage-only node, SSDs in the nodes are used to form a storage pool and volumes that are used by the compute nodes.

    Table 3.      Dell PowerFlex compute-only nodes

    Hardware

    Configuration

    CPU Cores 

    2 x Intel(R) Xeon(R) Gold 6248 CPU @ 2.50 GHz

    Memory 

    24 x 32 GB

    NIC 

    2 x Mellanox ConnectX-4 LX 25GbE SFP Adapter

    1 x Intel(R) Ethernet 10G 4P X710/I350 rNDC

    Storage 

    BOSS S1 Controller 2 x 240 GB SATA SSD 

    Dell HBA730 controller 2 x 900 GB SAS SSD

    Hypervisor

    ESXi 7.0

     PowerFlex 

    3.5.1.2