Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
PowerScale: Network Design Considerations
Executive summary Network architecture design Latency, bandwidth, and throughput Ethernet flow control SyncIQ considerations
Introduction
SyncIQ disaster recovery with SmartConnect
Replication traffic over dedicated WAN links
Quality of Service (QoS) Software-Defined Networking PowerScale OneFS ports SmartConnect considerations Ethernet, MTU, and IP overhead Access Zones best practices Source-Based Routing considerations Isilon 6th generation 1 GbE interfaces Intelligent Platform Management Interface IPv6 OneFS host-based firewall Network troubleshooting Appendix A: Supported network optics and transceivers Appendix B: Technical support and resources

Replication traffic over dedicated WAN links

Replication traffic over dedicated WAN links

  • Depending on the network topology and configuration, in certain cases PowerScale SyncIQ data may be sent across a dedicated WAN link separated from client traffic. Under these circumstances, the recommended option is using a different subnet on the PowerScale cluster for replication traffic, separated from the subnet for user data access.