Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—vSAN 2-Node Cluster on VxRail

close

view all chapters

Requirements, Recommendations, and Restrictions
VxRail hardware VxRail software version VMware vCenter Server Witness virtual appliance Physical network Port requirements Witness and Management network topology Network layout Capacity planning considerations Node upgrades Licensing

Network layout

Network layout

  • The following chart illustrates the network layout that is used by VxRail in the configuration of a vSAN 2-node cluster. Although VMware supports using an alternative vLAN other than vSAN vLAN for WTS, VxRail requires the WTS to have its own vLAN. This layout is specific to the VxRail vSAN 2-node cluster. The configuration of the management cluster is slightly different as described in the VxRail Network Planning Guide.

    Figure 5.              Network layout of a VxRail vSAN 2-node cluster