Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 4.x on VxRail
Executive summary VMware Cloud Foundation on VxRail VMware Cloud Foundation on VxRail Requirements and Use Cases VMware Cloud Foundation on VxRail Workload Domain Planning Data Center and Network Requirements Cloud Foundation on VxRail High-Level Design Decisions Cloud Foundation on VxRail Workload Planning Cloud Foundation on VxRail Licensing Planning Cloud Foundation on VxRail Physical Network Planning Cloud Foundation on VxRail Physical Network Preparation VxRail Cluster Deployment Preparation Prepare for VMware Cloud Foundation Management VI Workload Domain Prepare for Cloud Foundation VI Workload Domain Prepare for NSX-T Edge Gateway Services
Introduction
Capture external router settings for eBGP peering
Capture settings for NSX-T edge gateway uplinks
Capture NSX-T edge overlay network settings
Capture second site settings for stretched cluster
Prepare for Cloud Foundation Application Virtual Network Cloud Foundation On VxRail Housekeeping Tasks Appendixes

Capture NSX-T edge overlay network settings

Capture NSX-T edge overlay network settings

  • The NSX-T edge nodes must be able to pass network traffic over an edge overlay network. This edge overlay network is separate from the NSX-T host overlay network in that it enables communications between the ESX-T edge nodes.

    • The selected VLAN must be configured on each leaf switch to enable connectivity over the edge overlay network.
    • An IP address is assigned to each NSX-T edge node to enable connectivity over the NSX-T edge overlay network.