Appendix F: VI workload domain configuration settings

Thank you for your feedback!

This table lists the configuration settings required to support the configuration of a standard VI workload domain by SDDC Manager.

Category	Detail	Description
Global	Domain Name
Global	Datacenter Name	Name of vSphere data center to be configured in vCenter instance supporting VI workload domain
Management	vCenter	Hostname
		IP Address
		Subnet Mask
		Default gateway
		Management Account
NSX-T Host Overlay Network	Static IP Assignment Method	Name of static IP address pool
		IP address range in CIDR format
		Starting IP address to be assigned for host overlay network
		Ending IP address to be assigned for host overlay network
		Gateway
	Dynamic IP Assignment Method	IP address of DHCP server to assign IP addresses to VTEP tunnel endpoints for host overlay network
	Dynamic IP Assignment Method	Range of IP addresses in DHCP server to be assigned to VTEP tunnel endpoints for host overlay network

Use this table only if a new NSX-T edge cluster is deployed as part of the VI workload domain.

Category	Detail	Description
NSX-T ASN	Autonomous System Number	ASN for the workload domain edge cluster
NSX-T Manager	NSX-T management cluster	IP address of NSX-T Manager VIP
		IP address for first NSX-T Manager
		IP address for second NSX-T Manager
		IP address for third NSX-T Manager
		Subnet Mask
		Default Gateway
NSX-T Edge Node 1	Name	Hostname of virtual appliance
	Management IP Address	Must be within workload domain management network subnet
	Uplink 1 IP Address	IP address for BGP peering on first NSX-T edge uplink VLAN for this workload domain
	Uplink 2 IP Address	IP address for BGP peering on second NSX-T edge uplink VLAN for this workload domain
	Overlay IP Address	IP address for overlay network between edge nodes in this workload domain
NSX-T Edge Node 2	Name	Hostname of virtual appliance
	Management IP Address	Must be within workload domain management network subnet
	Uplink 1 IP Address	IP address for BGP peering on first NSX-T edge uplink VLAN for this workload domain
	Uplink 2 IP Address	IP address for BGP peering on second NSX-T edge uplink VLAN for this workload domain
	Overlay IP Address	IP address for overlay network between edge nodes in this workload domain
NSX-T Edge Uplink 1	VLAN	Used for BGP peering with upstream routing services for this workload domain
NSX-T Edge Uplink 2	VLAN	Used for BGP peering with upstream routing services for this workload domain
NSX-T Edge Overlay Network	VLAN	Used for edge overlay network connecting NSX-T edge nodes in this workload domain

If a new edge cluster is deployed, use this table to capture the BGP neighbors for the NSX-T edge gateway.

Category	Detail	Description
External ASN	ASN Value	Autonomous System Number for external routers
External Router 1	IP Address	IP Address for peering with NSX-T edge gateway on first NSX-T edge uplink VLAN
External Router 1	Password	Neighbor password for BGP peering
External Router 2	IP Address	IP Address for peering with NSX-T edge gateway on second NSX-T edge uplink VLAN
External Router 2	Password	Neighbor password for BGP peering

Use this table only if a vSphere for Tanzu supervisor cluster will be configured on the VI workload domain.

Detail	Type	Description
Pod CIDRs	Internal	Used by Kubernetes pods that run in the cluster
Service CIDRs	Internal	Used by Kubernetes applications that need a service IP address
Ingress CIDRs	External	Used for load balancing
Egress CIDRs	External	Used for NAT endpoint use