This table lists the configuration settings that are required by Cloud Builder to deploy the Cloud Foundation management workload domain on the VxRail cluster platform.
Category | Detail | Description |
Cloud Builder | IP Address | Temporary for Cloud Builder virtual appliance |
Global | NTP | IP Address |
DNS | IP Address | |
SSO Site Name | Must be the same site name as used for the VxRail cluster. | |
SSO Domain |
| |
DNS Zone Name |
| |
SDDC | Manager | Hostname |
IP Address | ||
Domain Name | ||
NSX-T | Manager (VIP) | Hostname |
IP Address | ||
Manager Node 1 | Hostname | |
IP Address | ||
Manager Node 2 | Hostname | |
IP Address | ||
Manager Node 3 | Hostname | |
IP Address | ||
Appliance Size | (Small, Medium, Large) | |
Static IP Assignment Method | Name of static IP address pool | |
IP address range in CIDR format | ||
Starting IP address to be assigned for host overlay network | ||
Ending IP address to be assigned for host overlay network | ||
Gateway | ||
Dynamic IP Assignment Method | IP address of DHCP server to assign IP addresses to VTEP tunnel endpoints for host overlay network | |
Range of IP addresses in DHCP server to be assigned to VTEP tunnel endpoints for host overlay network | ||
vSphere Objects | Data Center Name | Must match value in VxRail cluster |
Cluster Name | Must match value in VxRail cluster | |
VxRail Distributed Switch Name(s) | Must match values used in VxRail cluster | |
NSX-T Distributed Switch Name | If deploying separate VDS for NSX-T networking. VDS name must be unique in VxRail cluster. | |
vSAN Datastore Name | Must match value used in VxRail cluster | |
vSphere Resource Pools | SDDC Management | Required for consolidated architecture |
SDDC Edge | Required for consolidated architecture | |
User Edge | Required for consolidated architecture | |
User VM | Required for consolidated architecture |