Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 4.2 on VxRail
Prepare for Cloud Foundation Application Virtual Network
Introduction Select the Application Virtual Network region settings Select settings for NSX-T edge nodes Select external router settings for eBGP peering Select NSX-T Edge overlay network settings Select second site settings for stretched cluster

Select external router settings for eBGP peering

  • Appendix F: Application Virtual Network configuration captures what is configured on the upstream routers that will peer with the AVN Edge Service Gateways.

    • The ASN values are configured on the NSX-T edge nodes during Cloud Foundation on VxRail initial deployment.
    • The password is configured on the NSX-T edge nodes during Cloud Foundation on VxRail initial deployment.
    • No other BGP settings outside of the default settings are configured on the NSX-T edge nodes during Cloud Foundation on VxRail initial deployment.
    • For the first physical router, the receiving IP address selected must be able to send and receive traffic from the NSX-T edge uplink 1.
    • For the second physical router, the receiving IP address selected must be able to send and receive traffic from the NSX-T edge uplink 2.

    Figure 47.          Network settings for external routing services for eBGP peering

next

Select NSX-T Edge overlay network settings