Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 4.0 on VxRail
Prepare for Cloud Foundation Application Virtual Network
Introduction Select the Application Virtual Network region settings Select settings for NSX-T edge nodes Select external router settings for eBGP peering Select NSX-T Edge overlay network settings Select 2nd site settings for stretched cluster

Select the Application Virtual Network region settings

  • Cloud Builder will configure two regions to support the future deployment of the vRealize software on the Cloud Foundation on VxRail platform. ‘Region A’ is a virtual network segment for the vRealize management components that require mobility between regions, whereas ‘xRegion’ is for management components that are assigned to a specific region. The regions must be assigned IP addresses that can pass upstream to end users and connect to external support sites to enable software lifecycle management.

    A close up of text on a white background Description automatically generated

    Figure 35.          AVN Regions and Logical Segments

    The table in Appendix F: Application Virtual Network configuration outlines the settings that need to be captured and input into Cloud Builder at the time of initial deployment of Cloud Foundation.

    Specific details for the deployment and configuration of the vRealize software product is out of scope for this guide. Refer to the VMware documentation VMware Validated Design Documentation for more information.

next

Select settings for NSX-T edge nodes