Your Browser is Out of Date

ShareDemos uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 4.0 on VxRail
Prepare for Cloud Foundation Application Virtual Network
Introduction Select the Application Virtual Network region settings Select settings for NSX-T edge nodes Select external router settings for eBGP peering Select NSX-T Edge overlay network settings Select 2nd site settings for stretched cluster

Select NSX-T Edge overlay network settings

  • The NSX-T edge nodes need to be able to pass network traffic over an edge overlay network. This edge overlay network is separate from the NSX-T host overlay network in that it enables communications between the ESX-T edge nodes only.

    • The selected VLAN must be configured on each leaf switch to enable routing over the edge overlay network.
    • The selected VLAN will be configured into each NSX-T edge node during Cloud Foundation on VxRail initial deployment.
    • An IP address from the selected ranges is assigned to each NSX-T edge node to enable connectivity over the NSX-T edge overlay network.

next

Select 2nd site settings for stretched cluster