The unified resources of a VxRail appliance create a virtual infrastructure that is defined and managed as a vSphere cluster under a single instance of vCenter. A decision must be made to use the VxRail-supplied vCenter Server, which is deployed in the cluster as part of the initial initialization process, or a customer-supplied vCenter server, which is external to the cluster. During the VxRail initialization process which creates the final product, you must select whether to deploy the embedded VxRail-supplied vCenter Server on the cluster or deploy the cluster on an external customer-supplied vCenter server. Once the initialization process is complete, migrating to a new vCenter single point of management requires professional services assistance, and is difficult to change.
Dell Technologies recommends that you consider all the ramifications during this planning and preparation phase, and decide on the single point of management option that will work most effectively for your organization.
The following should be considered for selecting the VxRail vCenter server:
- A vCenter Standard license is included with VxRail, and does not require a separate license. This license cannot be transferred to another vCenter instance.
- The VxRail vCenter Server can manage only a single VxRail instance. This means an environment of multiple VxRail clusters with the embedded vCenter instance will require an equivalent number of points of management for each cluster.
- VxRail Lifecycle Management supports the upgrade of the VxRail vCenter server. Upgrading a customer-supplied vCenter using VxRail Lifecycle Management is not supported.
- DNS services are required for VxRail. With the VxRail vCenter option, you have the choice of using the internal DNS supported within the VxRail cluster, or leveraging external DNS in your data center.
For a customer-supplied vCenter, the following items should be considered:
- The vCenter Standard license included with VxRail cannot be transferred to a vCenter instance outside of the VxRail cluster.
- Multiple VxRail clusters can be configured on a single customer-supplied vCenter server, limiting the points of management.
- With the customer-supplied vCenter, external DNS must be configured to support the VxRail cluster.
- Ensuring version compatibility of the customer-supplied vCenter with VxRail is the responsibility of the customer.
- With the customer-supplied vCenter, you have the option of configuring the virtual distributed switch or switches yourself to support the VxRail cluster, or have VxRail deploy a virtual distributed switch and perform the configuration instead. This option is advantageous if you want better control and manageability of the virtual networking in your data center, and consolidate the number of virtual distributed switches in your vCenter instance.
Note: The option to use the internal DNS or to deploy the VxRail cluster against a preconfigured virtual distributed switch requires VxRail version of 7.0.010 or later.
For more details on the planning steps for a customer-supplied vCenter, see the Dell EMC VxRail vCenter Server Planning Guide.