VxFlex integrated systems combine Dell EMC PowerEdge servers using VxFlex OS to create a software-defined SAN. VxFlex integrated systems, which include the VxFlex appliance and VxFlex integrated rack, are fully supported and configured to customer specifications.
Customers have several configuration options—from solid-state drives (SSDs) to newer storage technologies such as Non-Volatile Memory Express (NVMe) or Peripheral Component Interconnect Express (PCIe) flash. With these options, customers can create storage tiers that match their capacity and performance requirements. Complementary to storage tiering is the ability to use Quality of Service (QoS) settings. With QoS, customers can define maximum IOPS, maximum IOPS per GB, maximum bandwidth, and maximum bandwidth per GB.
VxFlex OS virtualization software supports data compression, which saves valuable storage space on SSDs. Compression is not enabled by default; rather, it must be specified when a volume is created. If a volume does not support compression, then thin provisioning is used by default. Thin provisioning is a technology that reserves storage space by allocating only space that is used, enabling more efficient use of storage.
The VxFlex integrated rack is an engineered system that provides the ultimate performance, reliability, scalability, agility, and flexibility for modern data center workloads, IaaS, and PaaS cloud infrastructure initiatives. The system is powered by VxFlex OS software-defined storage and based on industry-leading enterprise-class PowerEdge servers. It is a rack scale hyperconverged system that comes with a proprietary intelligent physical infrastructure (IPI) cabinet and offers integrated networking and a dedicated system management control plane.
Figure 8. VxFlex integrated rack benefits
The modular design of the VxFlex integrated rack enables you to add standardized units of infrastructure to the environment. With this scalable model, you can expand the infrastructure in small increments, to help to eliminate the overprovisioning that is experienced with other approaches. The following figure shows the overall VxFlex OS architecture:
Figure 9. VxFlex integrated rack scalability
The entire system is built and configured at the Dell Technologies factory according to proven and tested best practices. In addition to the unmatched performance, scalability, and performance, customers benefit from one-call support for all components and end to end life cycle management through a proven automated Release Certification Matrix (RCM) for all components including software and firmware.
VxFlex OS consists of three primary components:
VxFlex OS has an efficient decentralized block I/O flow that is combined with a distributed, sliced volume layout. This design results in a massively parallel I/O system that can scale up to several hundred nodes. VxFlex OS offers multiple deployment options, taking the flexibility of an HCI and an engineered system to the next level.
In the VMware environment, the VxFlex OS SDS is installed as a vSphere Installation Bundle (VIB) in a special VM called Storage VM (SVM). In other words, the MDM and SDS components are installed on a dedicated SVM, whereas the SDC is installed directly on the ESXi host. Storage VMs (SVMs) must have a management IP address and another address for the data network. The data network is where traffic flows between SDSs and SDCs (for read/writes) and between SDSs (for rebuild and rebalance).
The VxFlex OS volumes that are defined over the Storage Pools are mapped to the ESXi host and then can be formatted as VMFS datastores, or can be used as RDM devices. When an SDC is mapped to a volume, it immediately gets access to the volume and exposes it locally to the applications as a standard block device. DirectPath Device management is performed using the SVM, yielding the best high availability and performance using two data networks.
From the VxFlex OS GUI, you can perform standard configuration and maintenance activities, as well as monitor the storage system’s health and performance. You can use the VxFlex OS GUI to retrieve overall VxFlex OS performance metrics, and to examine various elements.
From the VxFlex OS GUI, select Backend > Storage.
The Dashboard displays the following performance metrics:
To retrieve volume-specific performance metrics like Read/Write size, Read/Write IOPS, and Read/Write Bandwidth, select Frontend > Volumes > Volume Monitor.
VxFlex Manager is a VxFlex integrated rack management and orchestration (M&O) tool that provides a simple interface for provisioning, managing, monitoring, alerting, life cycle management, and reporting. It increases efficiency by reducing time-consuming manual operations that are otherwise required to implement, provision, and manage operations for your VxFlex integrated rack. Through automation, you can deploy and manage operations for your VxFlex integrated rack.
Using VxFlex Manager, you can: