You completed the configuration on the OpenManage Enterprise, OpenManage Network Manager, and SCOM servers. Now run tests to ensure that the SNMP traps and SYSLOG messages are being forwarded to SCOM as SNMPv2 traps.
To configure the test from an SU node iDRAC:
Figure 36. Configuring test of SNMP trap from SU node iDRAC
To test the Azure Stack Hub switches:
Figure 37. Creating a test SNMP trap from the Azure Stack Hub switches
Verify your configuration and run the previously defined tests to ensure that they are set up correctly. The alerts should be visible in the OpenManage Enterprise and OpenManage Network Manager consoles and in the SCOM Alerts view.
The SCOM administrator can create alerts from the relevant SNMP events and can format the alerts to fit the organizational requirements.
The following figure shows traps originating from OpenManage Enterprise and OpenManage Network Manager servers in SCOM:
Figure 38. Viewing SNMP events in SCOM Alerts view