Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Kinetica with the Dell EMC PowerFlex Family
Executive Summary Introduction Product overview Solution Architecture Kinetica Installation
Kinetica Installation
KAgent Installation with KAgent (On Premise)
KAgent Installation
Kinetica Installation
Solution Scenarios Conclusion Appendix A Appendix B Technical support and resources

KAgent Installation

KAgent Installation

  •  Pre-requisites:

    1. Download the KAgent package from the Kinetica Repository  into Kinetica node
    1. For installing on GPU cards:
    1. Install NVIDIA Graphics Driver on the Kinetica node.

    For more information about installing, see Installing NVIDIA Driver

    1. Add GPU cards as PCIe devices into the Kinetica node. For more information about node settings, see Appendix B.

    KAgent can be deployed as Debian/Ubuntu installation package on the Kinetica node. Copy the KAgent package to the node, deploy it using the standard procedures for a local package.

    This step installs the package to the directory /opt/gpudb/kagent and registers and starts the kagent_ui service. KAgent will open port 8081 on the local firewall (if enabled).

    • On Debian/Ubuntu:

    sudo apt install ./kagent-<version>.<architecture>.deb