Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
End-to-End Deployment Guide - Cluster Creation Using WAC: Dell Integrated System for Microsoft Azure Stack HCI
Notes, cautions, and warnings Copyright Introduction Solution Overview Solution deployment References Day 1 operations Managing and monitoring clusters with Windows Admin Center
Managing and monitoring clusters with Windows Admin Center
Overview
Install Windows Admin Center
Add the HCI cluster connection
Access the HCI cluster
View server details
View drive details
Managing and monitoring volumes
Enabling data deduplication on Storage Spaces Direct
Monitoring and managing VMs
Managing virtual switches
Dell OpenManage Integration with Windows Admin Center Updates and maintenance

Add the HCI cluster connection

Add the HCI cluster connection

  • This task applies to Azure Stack HCI and Windows Server. For monitoring and management purposes, add the hyperconverged cluster that is based on Microsoft HCI Solutions from Dell Technologies as a connection in Windows Admin Center.
    1. Go to Windows Admin Center > Cluster Manager.
      Figure 3. HCI cluster navigation
    2. Click Add.
      The Add Cluster window is displayed.
    3. Enter the cluster FQDN and select Also add servers in the cluster.
      Figure 4. Adding the HCI cluster
      Windows Admin Center discovers the cluster and nodes that are part of the cluster.
    4. Click Add.
      The cluster is added to the connection list and Windows Admin Center is configured to monitor and manage the HCI cluster.